Click types have been moved to click repo itself. See pallets/click#1856
I've had some issues with typeshed types being outdated in another project
so might be good to avoid that here.
Commit history before merge:
* Get `click` types from main repo
* Fix mypy errors
* Require click v8 for type annotations
* Update Pipfile
* Add STDIN test to primer
- Check that out STDIN black support stays working
- Add asyncio.subprocess STDIN pip via communicate
- We just check we format python code from primer's `lib.py`
Fixes#2310
`black.strings.get_string_prefix` used to lowercase the extracted
prefix before returning it. This is wrong because 1) it ignores the
fact we should leave R prefixes alone because of MagicPython, and 2)
there is dedicated prefix casing handling code that fixes issue 1.
`.lower` is too naive.
This was originally fixed in 20.8b0, but was reintroduced since 21.4b0.
I also added proper prefix normalization for docstrings by using the
`black.strings.normalize_string_prefix` helper.
Some more test strings were added to make sure strings with capitalized
prefixes aren't treated differently (actually happened with my original
patch, Jelle had to point it out to me).
This commit adds a short section discussing the non-processing of docstrings
besides spacing improvements, mentions comment moving and links to the
AST equivalence discussion. I also added a simple spacing test for good
measure.
Commit history before merge:
* Mention comment non-processing in documentation, add spacing test
* Mention special cases for comment spacing
* Add all special cases, improve wording
Not sure the fix is right. Here is what I found: issue is connected
with line
first.prefix = prefix[comment.consumed :]
in `comments.py`. `first.prefix` is a prefix of the line, that ends
with `# fmt: skip`, but `comment.consumed` is the length of the
`" # fmt: skip"` string. If prefix length is greater than 14,
`first.prefix` will grow every time we apply formatting.
Fixes#2254
Closes#1246: This PR adds a new option (and automatically a toml entry, hooray for existing configuration management 🎉) to require a specific version of Black to be running.
For example: `black --required-version 20.8b -c "format = 'this'"`
Execution fails straight away if it doesn't match `__version__`.
PR #2286 did not fix the edge-cases (e.g. when the string is just long
enough to cause a line to be 89 characters long). This PR corrects that
mistake.
Resolves#2168 by disabling the insertion of a " " when the docstring is entirely empty.
Note that this PR is focussed only on the case of empty docstrings. In particular this does not make any changes to the behaviour that a " " is inserted if a non-empty docstring begins with the quoting character. That is, black still prefers:
""" "something" """
to:
""""something" """
and that:
""""Something""""
is not a legal docstring.
Commit history before merge:
Black now respects .gitignore files in all levels, not only root/.gitignore file
(apply .gitignore rules like git does).
* Fix: typo
* Fix: respect .gitignore files in all levels.
* Add: CHANGELOG note.
* Fix: TypeError: unsupported operand type(s) for +: 'NoneType' and 'PathSpec'
* Update docs.
* Fix: no parent .gitignore
* Add a comment since the if expression is a bit hard to understand
* Update tests - conver no parent .gitignore case.
* Use main's Pipfile.lock instead
The original changes in Pipfile.lock are whitespace only. The changes
turned the JSON's file indentation from 4 to 2. Effectively this
happened: `json.dumps(json.loads(old_pipfile_lock), indent=2) + "\n"`.
Just using main's Pipfile.lock instead of undoing the changes because
1) I don't know how to do that easily and quickly, and 2) there's a
merge conflict.
Co-authored-by: Richard Si <63936253+ichard26@users.noreply.github.com>
* Merge remote-tracking branch 'upstream/main' into i1730 …
conflicts for days ay?
We've depended on Click 7.x ever since we broke CI systems across the
world (oops lol) and flake8-mypy was purged a fair bit back: #1867
Also remove the primer tests import in tests/test_black.py because it's
annoying when just trying to actually target tests/test_black.py tests.
`pytest -k test_black.py` doesn't do what you expect due to that import.
There's three optimizations in this commit:
1. Don't check if Black's output is stable or equivalant if no changes
were made in the first place. It's not like passing the same code
(for both source and actual) through black.assert_equivalent or
black.assert_stable is useful. It's not a big deal for the smaller
tests, but it eats a lot of time in tests/test_format.py since
its test cases are big. This is also closer to how Black works IRL.
2. Use a smaller file for `test_root_logger_not_used_directly` since
the logging it's checking happens during blib2to3's startup so the
file doesn't really matter.
3. If we're checking a file is formatting (i.e. test_source_is_formatted)
don't run Black over it again with `black.format_file_in_place`.
`tests/test_format.py::TestSimpleFormat.check_file` is good enough.
* Move string-related utility to functions to strings.py, const.py
* Move Leaf/Node-related functionality to nodes.py
* Move comment-related functions to comments.py
* Move caching to cache.py and Mode/TargetVersion/Feature to mode.py
* Move some leftover functions to nodes.py, comments.py, strings.py
* Add missing files to source list for test runs
* Move line-related functionality into lines.py, brackets into brackets.py
* Move transformers to trans.py
* Move file handling, output, parsing, concurrency, debug, and report
* Move two more functions to nodes.py
* Add CHANGES
* Add numeric.py
* Add linegen.py
* More docstrings
* Include new files in tests
Co-authored-by: Jelle Zijlstra <jelle.zijlstra@gmail.com>
This is a follow-up of #2203 that uses a pytest marker instead of a bunch of
`skipUnless`. Similarly to the Python 2 tests, they are running by default and
will crash on an unsuspecting contributor with missing dependencies. This is
by design, we WANT contributors to test everything. Unless we actually don't
and then we can run:
pytest --run-optional=no_blackd
Relatedly, bump required aiohttp to 3.6.0 at least to get rid of expected
failures on Python 3.8 (see 6b5eb7d465).
Closes#2164.
Changes behavior of how .gitignore is handled. With this change, the rules in .gitignore are only used as a fallback if no exclusion rule is explicitly passed on the command line or in pyproject.toml. Previously they were used regardless if explicit exclusion rules were specified, preventing any overriding of .gitignore rules.
Those that depend only on .gitignore for their exclusion rules will not be affected. Those that use both .gitignore and exclude will find that exclude will act more like actually specifying exclude and not just another extra-excludes. If the previous behavior was desired, they should move their rules from exclude to extra-excludes.
Previously the RELAXED_DECORATOR detection would be falsely True on that
example. The problem was that an argument-less parentheses pair didn't
pass the `is_simple_decorator_trailer` check even it should. OTOH a
parentheses pair containing an argument or more passed as expected.
- Allow runs with no code diff output
- This is handy for reducing output to see which file is erroring
Test:
- Edit config for 'channels' to expect no changes and run with `--no-diff` and see no diff output
We're only fixing them so fuzzers don't yell at us when we break "valid"
code. I mean "valid" because some of the examples aren't even accepted by
Python.
Black would previously strip the parenthesis away from statements like this these ones:
assert (spam := 12 + 1)
return (cheese := 1 - 12)
Which happens to be invalid code. Now before making the parenthesis invisible, Black
checks if the assignment expression's parent is an assert stamtment, aborting if True.
Raise, yield, and await are already handled fine.
I added a bunch of test cases from the PEP defining asssignment expressions (PEP 572).
Optional trailing commas put by Black become magic trailing commas on another
pass of the tool. Since they are influencing formatting around optional
parentheses, on rare occasions the tool changes its mind in terms of putting
parentheses or not.
Ideally this would never be the case but sadly the decision to put optional
parentheses or not (which looks at pre-existing "magic" trailing commas) is
happening around the same time as the decision to put an optional trailing
comma. Untangling the two proved to be impractically difficult.
This shameful workaround uses the fact that the formatting instability
introduced by magic trailing commas is deterministic: if the optional trailing
comma becoming a pre-existing "magic" trailing comma changes formatting, the
second pass becomes stable since there is no variable factor anymore on pass 3,
4, and so on.
For most files, this will introduce no performance penalty since `--safe` is
already re-formatting everything twice to ensure formatting stability. We're
using this result and if all's good, the behavior is equivalent. If there is
a difference, we treat the second result as the binding one, and check its
sanity again.
Fixes#1738. Fixes#1812.
Previously, Black removed leading and trailing spaces in multiline docstrings but failed to remove them from one-line docstrings.
* Added support for top-level user configuration
At the user level, a TOML config can be specified in the following locations:
* Windows: ~\.black
* Unix-like: $XDG_CONFIG_HOME/black (~/.config/black fallback)
Instead of changing env vars for the entire black-primer process, they
are now changed only for the black subprocess, using a tmpdir.
Fixes: #1662
Work-around for https://bugs.python.org/issue2142
The test has to slightly mess with its input data, because the utility
functions default to ensuring the test data has a final newline, which
defeats the point of the test.
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
* Add test case to illustrate the issue
* Accept carriage returns as valid separators while enumerating comments
Without this acceptance, escaped multi-line statments that use carriage returns will not be counted into the 'ignored_lines' variable since the emitted line values will end with a CR and not an escape character. That leads to comments associated with the line being incorrectly labeled with the STANDALONE_COMMENT type, affecting comment placement and line space management.
* Remove comment linking to ephemeral build log
* Provide a stdin-filename to allow stdin to respect exclude/force-exclude rules
This will allow automatic tools to enforce the project's
exclude/force-exclude rules even if they pass the file through stdin to
update its buffer.
This is a similar solution to --stdin-display-name in flake8.
* Update src/black/__init__.py
Co-authored-by: Richard Si <63936253+ichard26@users.noreply.github.com>
* --stdin-filename should only respect --exclude-filename
* Update README with the new --stdin-filename option
* Write some tests for the new stdin-filename functionality
* Apply suggestions from code review
Co-authored-by: Hugo van Kemenade <hugovk@users.noreply.github.com>
* Force stdin output when we asked for stdin even if the file exists
* Add an entry in the changelog regarding --stdin-filename
* Reduce disk reads if possible
Co-authored-by: Richard Si <63936253+ichard26@users.noreply.github.com>
* Check for is_stdin and p.is_file before checking for p.is_dir()
Co-authored-by: Richard Si <63936253+ichard26@users.noreply.github.com>
Co-authored-by: Hugo van Kemenade <hugovk@users.noreply.github.com>
The `fix_docstring` function expanded all tabs, which caused a
difference in the AST representation when those tabs were inline and not
leading. This changes the function to only expand leading tabs so inline
tabs are preserved.
Fixes#1601.
Black used to erroneously remove all empty lines between non-function
code and decorators when formatting typing stubs. Now a single empty
line is enforced.
I chose for putting empty lines around decorated classes that have empty
bodies since removing empty lines around such classes would cause a
formatting issue that seems to be impossible to fix.
For example:
```
class A: ...
@some_decorator
class B: ...
class C: ...
class D: ...
@some_other_decorator
def foo(): -> None: ...
```
It is easy to enforce no empty lines between class A, B, and C.
Just return 0, 0 for a line that is a decorator and precedes an stub
class. Fortunately before this commit, empty lines after that class
would be removed already.
Now let's look at the empty line between class D and function foo. In
this case, there should be an empty line there since it's class code next
to function code. The problem is that when deciding to add X empty lines
before a decorator, you can't tell whether it's before a class or a
function. If the decorator is before a function, then an empty line
is needed, while no empty lines are needed when the decorator is
before a class.
So even though I personally prefer no empty lines around decorated
classes, I had to go the other way surrounding decorated classes with
empty lines.
Co-authored-by: Jelle Zijlstra <jelle.zijlstra@gmail.com>
* Fix incorrect space before colon in if/while stmts
Previously Black would format this code
```
if (foo := True):
print(foo)
```
as
```
if (foo := True) :
print(foo)
```
adding an incorrect space after the RPAR. Buggy code in the
normalize_invisible_parens function caused the colon to be wrapped in
invisible parentheses. The LPAR of that pair was then prefixed with a
single space at the request of the whitespace function.
This commit fixes the accidental skipping of a pre-condition check
which must return True before parenthesis normalization of a specific
child Leaf or Node can happen. The pre-condition check being skipped
was why the colon was wrapped in invisible parentheses.
* Add an entry in CHANGES.md
The quotes of multiline docstrings are now only normalized when string
normalization is off, instead of the string normalization setting being
ignored and the quotes being *always* normalized.
I had to make a new test case and data file since the current pair for
docstrings only worked when there is no formatting difference between the
formatting results with string normalization on and off. I needed to add
tests for when there *are* differences between the two. So I split
test_docstring's test code when string normalization is disabled into a
new test case along with a new data file.
This addresses a few crashers, namely:
* producing non-equivalent code due to mangling escaped newlines,
* invalid hugging quote characters in the docstring body to the docstring outer
triple quotes (causing a quadruple quote which is a syntax error),
* lack of handling for docstrings that start on the same line as the `def`, and
* invalid stripping of outer triple quotes when the docstring contained
a string prefix.
As a bonus, tests now also run when string normalization is disabled.
This required some hackery. Long story short, we need to reuse the ability to
omit rightmost bracket pairs (which glues them together and splits on something
else instead), for use with pre-existing trailing commas.
This form of user-controlled formatting is brittle so we have to be careful not
to cause a scenario where Black first formats code without trailing commas in
one way, and then looks at the same file with pre-existing trailing commas
(that it itself put on the previous run) and decides to format the code again.
One particular ugly edge case here is handling of optional parentheses. In
particular, the long-standing `line_length=1` hack got in the way of
pre-existing trailing commas and had to be removed. Instead, a more
intelligent but costly solution was put in place: a "second opinion" if the
formatting that omits optional parentheses ended up causing lines to be too
long. Again, for efficiency purposes, Black reuses Leaf objects from blib2to3
and modifies them in place, which was invalid for having two separate
formattings. Line cloning was used to mitigate this.
Fixes#1619
- when a trailing comma is specified in any bracket pair, that signals to Black
that this bracket pair needs to be always exploded, e.g. presented as "one
item per line";
- this causes some changes to previously formatted code that erroneously left
trailing commas embedded into single-line expressions;
- internally, Black needs to be able to identify trailing commas that it put
itself compared to pre-existing trailing commas. We do this by using/abusing
lib2to3's `was_checked` attribute. It's True for internally generated
trailing commas and False for pre-existing ones (in fact, for all
pre-existing leaves and nodes).
Fixes#1288
* put experimental string stuff behind a flag
* update tests
* don't need an output section if it's the same as the input
* Primer: Expect no formatting changes in attrs, hypothesis and poetry with --experimental-string-processing off
Co-authored-by: Hugo van Kemenade <hugovk@users.noreply.github.com>
Ever since --force-exclude was added, --exclude started to touch files
that were given to Black through the CLI too. This is not documented
behaviour and neither expected as --exclude and --force-exclude now
behave the same!
Before this commit, get_sources() when encountering a file that was passed
explicitly through the CLI would pass a single Path object list to
gen_python_files(). This causes bad behaviour since that function
doesn't treat the exclude and force_exclude regexes differently. Which
is fine for recursively found files, but *not* for files given through
the CLI.
Now when get_sources() iterates through srcs and encounters
a file, it checks if the force_exclude regex matches, if not, then the
file will be added to the computed sources set.
A new function had to be created since before you can do regex matching,
the path must be normalized. The full process of normalizing the path is
somewhat long as there is special error handling. I didn't want to
duplicate this logic in get_sources() and gen_python_files() so that's
why there is a new helper function.
* Bump toml from 0.10.0 to 0.10.1 to fix a bug
* Add tests for TOML parsing and reading
* Fix configuration bug affecting vim plugin
The vim plugin directly calls parse_pyproject and skips the Click processing
, but parse_pyproject assumed that it would only be used before Click processing
and therefore made the config values click friendly. This moves the "make the values
click friendly processing" into read_pyproject_toml which is only called by a Click
callback.
* Please mypy and flake8
As discussed in #1441, Python 3.9's new parser will not parse
`(*starred)` even using `compile()` with the `PyCF_ONLY_AST`
flag (as `ast.parse()` does), it raises a `SyntaxError`. This
breaks the four tests that use this file with Python 3.9.
Upstream does not consider this to be a bug - see
https://bugs.python.org/issue40848#msg370643 - so we must
adjust the expression. As suggested by @JelleZijlstra, this just
adds a comma, which makes the new parser happy with it (the old
parser is fine with this form also).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
- Leave logic to still allow for formatting changes to be ignored
- Now just capture the output of any other error that has a > 1 returncode
- Raise on anything else
Test: Add unit test to exercise this new logic
* Add black-primer unittests
- Get this tool covered with some decent unittests for all unittests wins
- Have a CLI and lib test class
- Import it from `test_black.py` so we always run tests
- Revert typing asyncio.Queue as Queue[str] so we can work in 3.6
- **mypy**: Until black > 3.6 disallow_any_generics=False for primer code
Test:
- Run tests: `coverage run tests/test_primer.py` or `coverage run -m unittest`
```
(b) cooper-mbp1:black cooper$ coverage report
Name Stmts Miss Cover
---------------------------------------------
src/black_primer/cli.py 49 8 84%
src/black_primer/lib.py 148 28 81%
tests/test_primer.py 114 1 99%
---------------------------------------------
TOTAL 311 37 88%
```
* Use ProactorEventLoop for Windows + fix false path for Linux
* Set Windows to use ProactorEventLoop in to benefit all callers
* sys.platform seems to not having the loop applied - So type ignore and use platform.system() gate
* Have each test loop correctly set to ProactorEventLoop on Windows for < 3.8 too
- Move black.py to src/black/__init__.py
- Have setuptools_scm make src/_black_version.py and exclude from git
- Move blackd.py to src/blackd/__init__.py
- Move blib2to3/ to src/
- Update `setup.py`
- Update unittests to pass
- Mostly path fixing + resolving
- Update CI
- pre-commit config
- appveyor + travis
Tested on my mac with python 3.7.5 via:
```
python3 -m venv /tmp/tb3
/tmp/tb3/bin/pip install --upgrade setuptools pip coverage pre-commit
/tmp/tb2/bin/pip install ~/repos/black/
cd ~/repos/black/
/tmp/tb2/bin/coverage run tests/test_black.py
/tmp/tb3/bin/pre-commit run -a
/tmp/tb3/bin/black --help
/tmp/tb3/bin/black ~/repos/ptr/ptr.py
```
AWS Lambda and some other virtualized environment may not permit access
to /dev/shm on Linux and as such, trying to use ProcessPoolExecutor will
fail.
As using parallelism is only a 'nice to have' feature of black, if it fails
we gracefully fallback to a monoprocess implementation, which permits black
to finish normally.
Co-authored-by: Allan Simon <asimon@yolaw.fr>
* Re-indent the contents of docstrings when indentation changes
Keeping the contents of docstrings completely unchanged when
re-indenting (from 2-space intents to 4, for example) can cause
incorrect docstring indentation:
```
class MyClass:
"""Multiline
class docstring
"""
def method(self):
"""Multiline
method docstring
"""
pass
```
...becomes:
```
class MyClass:
"""Multiline
class docstring
"""
def method(self):
"""Multiline
method docstring
"""
pass
```
This uses the PEP 257 algorithm for determining docstring indentation,
and adjusts the contents of docstrings to match their new indentation
after `black` is applied.
A small normalization is necessary to `assert_equivalent` because the
trees are technically no longer precisely equivalent -- some constant
strings have changed. When comparing two ASTs, whitespace after
newlines within constant strings is thus folded into a single space.
Co-authored-by: Luka Zakrajšek <luka@bancek.net>
* Extract the inner `_v` method to decrease complexity
This reduces the cyclomatic complexity to a level that makes flake8 happy.
* Blacken blib2to3's docstring which had an over-indent
Co-authored-by: Luka Zakrajšek <luka@bancek.net>
Co-authored-by: Zsolt Dollenstein <zsol.zsol@gmail.com>
This pull request's main intention is to wraps long strings (as requested by #182); however, it also provides better string handling in general and, in doing so, closes the following issues:
Closes#26Closes#182Closes#933Closes#1183Closes#1243
Fixes#1360, where an invalid config file causes a return/exit code of 1. This
change means this case is caught earlier, treated like any other bad
parameters, and results in an exit code of 2.
Co-authored-by: Toby Fleming <tobywf@users.noreply.github.com>
`split("\n")` includes a final empty element `""` if the final line
ends with `\n` (as it should for POSIX-compliant text files), which
then became an extra `"\n"`.
`splitlines()` solves that, but there's a caveat, as it will split
on other types of line breaks too (like `\r`), which may not be
desired.
Fixes#526.
`type: ignore` shouldn't block collapsing a line, since it will still
apply fine to the merged line. This prevents an issue where a reformat
causes it to shift lines and then be merged on a subsequent pass.
There is a downside to this, which is that it can cause a `type:
ignore` to apply to more code than was originally intended. There
might be a way to apply this in a more limited situation, but I'm not
sure what it is.
Fixes#1061.
* Make most of blib2to3 directly typed and mypyc-compatible
This used a combination of retype and pytype's merge-pyi to do the
initial merges of the stubs, which then required manual tweaking to
make actually typecheck and work with mypyc.
Co-authored-by: Sanjit Kalapatapu <sanjitkal@gmail.com>
Co-authored-by: Michael J. Sullivan <sully@msully.net>
* Make black able to compile and run with mypyc
The changes made fall into a couple categories:
* Fixing actual type mistakes that slip through the cracks
* Working around a couple mypy bugs (the most annoying of which being
that we need to add type annotations in a number of places where
variables are initialized to None)
Co-authored-by: Sanjit Kalapatapu <sanjitkal@gmail.com>
Co-authored-by: Michael J. Sullivan <sully@msully.net>
The old behavior would detect the existence of a `# fmt: on` in a leaf
node's comment prefix and immediately mark the node as formatting-on,
even if a subsequent `# fmt: off` in the same comment prefix would turn
it back off. This change modifies that logic to track the state through
the entire prefix and take the final state.
Note that this does not fully solve on/off behavior, since any _comment_
lines between the off/on are still formatted. We may need to add
virtual leaf nodes to truly solve that. I will leave that for a separate
commit/PR.
Fixes#1005
Fixes#1042 (and probably #1044 which looks like the same thing).
The issue with the "obviously unnecessary" parentheses that #850 removed is that sometimes they're necessary to help Black fit something in one line. I didn't see an obvious solution that still removes the parens #850 was intended to remove, so let's back out this change for now in the interest of unblocking a release.
This PR also adds a test adapted from the failing example in #1042, so that if we try to reapply the #850 change we don't break the same case again.
* Blacken .py files in blib2to3
This is in preparation for adding type annotations to blib2to3 in
order to compiling it with mypyc (#1009, which I can rebase on top of
this).
To enforce that it stays blackened, I just cargo-culted the existing
test code used for validating formatting. It feels pretty clunky now,
though, so I can abstract the common logic out into a helper if that
seems better. (But error messages might be less clear then?)
* Tidy up the tests
It turns out we also need to handle invisible *left* parens added at
the *start* of a line. Refactor `contains_unsplittable_type_ignore` to
handle this more cleanly.
* add test for special unicode symbol which usual re can not process correctly
add regex lib which supports unicode 12.1.0 standard
replace re usage in project in favor to regex
* #455 fix dependency
In #1040 I had convinced myself that the type ignore logic didn't
need anything like the ignored_ids from the type comment logic, but I
was wrong, and we do.
We hit these cases in practice a bunch.
The code introduced in #1027 to detect whether a type comment appeared
after a regular comment in a Line would spuriously misfire when a leaf
was in the comments dict but had an empty list of comments. This can
occur as an artifact of how comments on trailing commas are handled,
it seems.
(This was discovered trying to test black out on mypy.)
Type comments only apply if they are the first comment on the line,
which means that allowing them to be pushed behind a regular comment
when joining lines is a semantic change (and, indeed, one that black
catches and fails on).
* Parse `:=` properly
* never unwrap parenthesis around `:=`
* When checking for AST-equivalence, use `ast` instead of `typed-ast` when running on python >=3.8
* Assume code that uses `:=` is at least 3.8
Modified maybe_remove_trailing_comma to remove trailing commas for
typedarglists (in addition to arglists), and updated line split logic
to ensure that all lines in a function definition that contain only one
arg have a trailing comma.
Based on the feedback in
https://github.com/python/black/pull/845#issuecomment-490622711
- Remove TokenizerConfig, and add a field to Grammar instead.
- Pass the Grammar to the tokenizer.
- Rename `ASYNC_IS_RESERVED_KEYWORD` to `ASYNC_KEYWORDS` and
`ASYNC_IS_VALID_IDENTIFIER` to `ASYNC_IDENTIFIERS`.
Fixes#593
I looked into this bug with @ambv and @carljm, and we reached the
conclusion was that it's not possible for the tokenizer to determine if
async/await is a keyword inside all possible generators without breaking
the grammar for older versions of Python.
Instead, we introduce a new tokenizer mode for Python 3.7+ that will
cause all async/await instances to get parsed as a reserved keyword,
which should fix async/await inside generators.
